Hexel's Secondary Skill

Leon L.H. wrote:Skill Name: The Vengeance of Demon Slayers
Skill Type: One Sword – Devil Fruit Power
Skill Description:

Legend says the Demon Slayers used to use this sword technique to bring down the demons back to Hell. Now only one Demon Slayer remains and the secret technique lies with him.
Skill user uses his katana Midnight Rush to carry out this skill.

Skill Strength:

1. Able to do area, long and close range attacks. (Say Area, Close and Mid Range.)
2. Uses both Darkness and Fire element. +10 Strength against Cold element users due to Fire element.
3. Able to create multiple replica swords.(Out of? be specific)
4. Uses skill user’s actual Katana, therefore all the strength of skill user’s katana – Midnight Rush. (Take that out, since its already added to your stats.)
5. +10 Finesse gained when using this ability in Darkness or Fire element field.

Skill Weakness:

1. Against Holy and Light users, -10 Strength.
2. Even though this skill can do different range of attacks, all attacks can’t go over 20 meters even at lvl 2 or 3. (I would say 15 meters)
3. Can only create 3 swords at lvl 1, 7 at lvl 2, and 10 at lvl 3. (Out of?)
4. Uses skill user’s actual Katana, therefore all the weakness of skill user’s katana – Midnight Rush.
5. -10 Strength when using this ability in Cold element field.

Ability Lvl 1 Name: The Oni Cutter
Ability Lvl 1 Type: Range – mid.
Ability Lvl 1 Cooldown: 2 posts.(Since it effects 2 people make this 3 Posts)
Ability Lvl 1 Description:

User coats the sword with darkness fire to make it stronger. Use will then grab the katana with both of his hands and swing vertically going one direction and swings it again going another direction, releasing a vertical line of darkness fire towards his enemies. The slash is 5ft. in length and 1ft. in width.

Ability Lvl 1 Strengths:

1. Able to attack any opponents who are 5 meters away.
2. Multiple opponent attack. Up to 2 opponents.
3. Causes impact and pushes back the opponent up to 3 meters back.

Ability Lvl 1 Weaknesses:

1. It only travels one way.
2. Opponents with 50+ Reflex can dodge the ability. (I would say only 35.)
3. Opponents with 10+ more Endurance than skill user's Strength will not be pushed back.

Ability Lvl 1 Name: Demon Claw
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 3 posts. (Make this 4 posts. It covers a wide distance)
Ability Lvl 1 Description:

User coat the blade with darkness flame and jump up in the air and raise his blade up. As he lands, he bring his blade downward hitting it against the ground causing three darkness flames to burst outward in three different direction up to 15 meters.(Change it to 10 meters.) There are about 6ft. distance between each line of darkness flames.

Ability Lvl 1 Strengths:

1. Multiple Target Attack. Up to 3 opponents.
2. Cause 1st degree burn when hit or near 2ft. in radius of any of three darkness flames. -5 Endurance. (For one Post)
3. Covers 180 degrees. (so, it makes a burst. not 3 flames. change it in the description to be more specific. )

Ability Lvl 1 Weaknesses:

1. More opponents there is, less the amount of damage taken. 3 = 1/3 of damage; 2 = ½ of damage. 1 = full damage.
2. Opponents with 10+ Endurance than skill user’s Strength will take half the damage.
3. Skill user’s side and back is vulnerable.

Ability Lvl 1 Name: Triple Eruption
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 4 posts.
Ability Lvl 1 Description:

User make 3 replicas of the katana using darkness and fire element. User then sends these 3 replicas up the air and let it land, 5 meters in front of the user, creating a triangle putting 20ft. in length space between each blade. Soon the blade will send darkness fire through the ground and creates an eruption within the triangle. The triangle is about 5 meters in radius. The eruption will go as high as 5 ft. Duration: 2 posts.

Ability Lvl 1 Strengths:

1. Area attack. Anyone who is within the triangle are affected. 5 meters in radius.
2. Eruption will cause 1st degree burn. -5 Endurance for 1 post after the ability is done.
3. Cause little structure change and an impact. +5 Strength.

Ability Lvl 1 Weaknesses:

1. It takes 1 post to erupt. Opponents have enough time to get out of the circle if they are paying attention.
2. It can affect his allies as well.
3. If one of the replica sword is blocked by an ability, Eruption will not occur.

-However, the immediate area, 2ft. in radius, of where the sword is will be burning with darkness flame, if the touched, they will suffer from 1st degree burn. -5 Endurance. Unless they are fire element users. (for one post)

Ability Lvl 1 Name: Burst Shot
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 3 posts.
Ability Lvl 1 Description:

Skill user creates hundreds of small tiny balls made of darkness fire and coat it around the katana. When the katana is collided against something, it not only cuts but those tiny darkness fire balls will burst because of the impact that was caused when the katana collided against something.

Ability Lvl 1 Strengths:

1. Those Darkness Fire Balls and really tiny. As small as pinky nail size. Good Sneak attack when fighting with close combat opponents.
2. Causes 1st degree burn. -5 Endurance for 1 post.
3. +5 Strength due to the impact it causes when it collides against something such as another equipment or an ability.

Ability Lvl 1 Weaknesses:

1. Opponents with 50+ Reflexes can dodge the burst when it explodes.(30 Reflex)
2. Fire element users will not be burned.
3. Heavy sets of armor can block the burst.(causing only half damage? or blocking the full amount?)

Leon L.H. wrote:Skill Name: The Vengeance of Demon Slayers
Skill Type: One Sword – Devil Fruit Power
Skill Description:

Legend says the Demon Slayers used to use this sword technique to bring down the demons back to Hell. Now only one Demon Slayer remains and the secret technique lies with him.
Skill user uses his katana Midnight Rush to carry out this skill.

Skill Strength:

1. Able to do area, close and mid range
2. Uses both Darkness and Fire element. +10 Strength against Cold element users due to Fire element.
3. Able to create multiple replica swords out of darkness fire element skill user have.
4. Uses skill user’s actual Katana, therefore all the strength of skill user’s katana – Midnight Rush.
5. +10 Finesse gained when using this ability in Darkness or Fire element field.

Skill Weakness:

1. Against Holy and Light users, -10 Strength.
2. Even though this skill can do different range of attacks, all attacks can’t go over 15 meters even at lvl 2 or 3.
3. Can only create 3 swords at lvl 1, 7 at lvl 2, and 10 at lvl 3 using his darkness flame element.
4. Uses skill user’s actual Katana, therefore all the weakness of skill user’s katana – Midnight Rush.
5. -10 Strength when using this ability in Cold element field.

Ability Lvl 1 Name: The Oni Cutter
Ability Lvl 1 Type: Range – mid.  
Ability Lvl 1 Cooldown: 3 posts.
Ability Lvl 1 Description:

User coats the sword with darkness fire to make it stronger. Use will then grab the katana with both of his hands and swing vertically going one direction and swings it again going another direction, releasing a vertical line of darkness fire towards his enemies. The slash is 5ft. in length and 1ft. in width.

Ability Lvl 1 Strengths:

1. Able to attack any opponents who are 5 meters away.
2. Multiple opponent attack. Up to 2 opponents.
3. Causes impact and pushes back the opponent up to 3 meters back.

Ability Lvl 1 Weaknesses:

1. It only travels one way.
2. Not effective against mid range or long range users. Since the max it can travel is 5 meters, all opponents have to do is stay further back.
3. Opponents with 10+ more Endurance than skill user's Strength will not be pushed back.

Ability Lvl 1 Name: Demon Claw
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown:  4 posts.
Ability Lvl 1 Description:

User coat the blade with darkness flame and jump up in the air and raise his blade up. As he lands, he bring his blade downward hitting it against the ground causing three darkness flames to burst outward in three different direction up to 10 meters. There are about 6ft. distance between each line of darkness flames.

Ability Lvl 1 Strengths:

1. Multiple Target Attack. Up to 3 opponents.
2. Cause 1st degree burn when hit or near 2ft. in radius of any of three darkness flames. -5 Endurance for 1 post.
3. It makes burst and all three flames connects, covering 180 degrees.

Ability Lvl 1 Weaknesses:

1. More opponents there is, less the amount of damage taken. 3 = 1/3 of damage; 2 = ½ of damage. 1 = full damage.
2. Opponents with 10+ Endurance than skill user’s Strength will take half the damage.
3. Skill user’s side and back is vulnerable.

Ability Lvl 1 Name: Triple Eruption
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 4 posts.
Ability Lvl 1 Description:

User make 3 replicas of the katana using darkness and fire element. User then sends these 3 replicas up the air and let it land, 5 meters in front of the user, creating a triangle putting 20ft. in length space between each blade. Soon the blade will send darkness fire through the ground and creates an eruption within the triangle. The triangle is about 5 meters in radius. The eruption will go as high as 5 ft. Duration: 2 posts.

Ability Lvl 1 Strengths:

1. Area attack. Anyone who is within the triangle are affected. 5 meters in radius.
2. Eruption will cause 1st degree burn. -5 Endurance for 1 post after the ability is done.
3. Cause little structure change and an impact. +5 Strength.

Ability Lvl 1 Weaknesses:

1. It takes 1 post to erupt. Opponents have enough time to get out of the circle if they are paying attention.
2. It can affect his allies as well.
3. If one of the replica sword is blocked by an ability, Eruption will not occur.

           -However, the immediate area, 2ft. in radius, of where the sword is will be burning with darkness flame, if the touched, they will suffer from 1st degree burn. -5 Endurance for 1 post. Unless they are fire element users.

Ability Lvl 1 Name: Burst Shot
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 3 posts.
Ability Lvl 1 Description:

Skill user creates hundreds of small tiny balls made of darkness fire and coat it around the katana.  When the katana is collided against something, it not only cuts but those tiny darkness fire balls will burst because of the impact that was caused when the katana collided against something.

Ability Lvl 1 Strengths:

1. Those Darkness Fire Balls are really tiny. As small as pinky nail size. Good Sneak attack when fighting with close combat opponents.
2. Causes 1st degree burn. -5 Endurance for 1 post.
3. +5 Strength due to the impact it causes when it collides against something such as another equipment or an ability.

Ability Lvl 1 Weaknesses:

1. Even with the sudden burst, the radius it covers is only 3ft.
2. Fire element users will not be burned.
3. Heavy sets of armor can block half of the burst,allowing them to receive only half of the damage.

Leon L.H. wrote:Skill Name: The Vengeance of Demon Slayers
Skill Type: One Sword – Devil Fruit Power
Skill Description:

Legend says the Demon Slayers used to use this sword technique to bring down the demons back to Hell. Now only one Demon Slayer remains and the secret technique lies with him.
Skill user uses his katana Midnight Rush to carry out this skill.

Skill Strength:

1. Able to do area, close and mid range
2. Uses both Darkness and Fire element. +10 Strength against Cold element users due to Fire element.
3. Able to create multiple replica swords out of darkness fire element skill user have.
4. Uses skill user’s actual Katana, therefore all the strength of skill user’s katana – Midnight Rush.
5. +10 Finesse gained when using this ability in Darkness or Fire element field.

Skill Weakness:

1. Against Holy and Light users, -10 Strength.
2. Even though this skill can do different range of attacks, all attacks can’t go over 15 meters even at lvl 2 or 3.
3. Can only create 3 swords at lvl 1, 7 at lvl 2, and 10 at lvl 3 using his darkness flame element.
4. Uses skill user’s actual Katana, therefore all the weakness of skill user’s katana – Midnight Rush.
5. -10 Finesse when using this ability in Cold element field.

Ability Lvl 1 Name: The Oni Cutter
Ability Lvl 1 Type: Range – mid.  
Ability Lvl 1 Cooldown: 3 posts.
Ability Lvl 1 Description:

User coats the sword with darkness fire to make it stronger. Use will then grab the katana with both of his hands and swing vertically going one direction and swings it again going another direction, releasing a vertical line of darkness fire towards his enemies. The slash is 5ft. in length and 1ft. in width.

Ability Lvl 1 Strengths:

1. Able to attack any opponents who are 5 meters away.
2. Multiple opponent attack. Up to 2 opponents.
3. Causes impact and pushes back the opponent up to 3 meters back.

Ability Lvl 1 Weaknesses:

1. It only travels one way.
2. Not effective against mid range or long range users. Since the max it can travel is 5 meters, all opponents have to do is stay further back.
3. Opponents with 10+ more Endurance than skill user's Strength will not be pushed back.

Ability Lvl 1 Name: Demon Claw
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown:  4 posts.
Ability Lvl 1 Description:

User coat the blade with darkness flame and jump up in the air and raise his blade up. As he lands, he bring his blade downward hitting it against the ground causing three darkness flames to burst outward in three different direction up to 10 meters. There are about 6ft. distance between each line of darkness flames.

Ability Lvl 1 Strengths:

1. Multiple Target Attack. Up to 3 opponents.
2. Cause 1st degree burn when hit or near 2ft. in radius of any of three darkness flames. -5 Endurance for 1 post.
3. It makes burst and all three flames connects, covering 180 degrees.

Ability Lvl 1 Weaknesses:

1. More opponents there is, less the amount of damage taken. 3 = 1/3 of damage; 2 = ½ of damage. 1 = full damage.
2. Opponents with 10+ Endurance than skill user’s Strength will take half the damage.
3. Skill user’s side and back is vulnerable.

Ability Lvl 1 Name: Triple Eruption
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 4 posts.
Ability Lvl 1 Description:

User make 3 replicas of the katana using darkness and fire element. User then sends these 3 replicas up the air and let it land, 5 meters in front of the user, creating a triangle putting 20ft. in length space between each blade. Soon the blade will send darkness fire through the ground and creates an eruption within the triangle. The triangle is about 5 meters in radius. The eruption will go as high as 5 ft. Duration: 2 posts.

Ability Lvl 1 Strengths:

1. Area attack. Anyone who is within the triangle are affected. 5 meters in radius.
2. Eruption will cause 1st degree burn. -5 Endurance for 1 post after the ability is done.
3. Cause little structure change and an impact. +5 Strength.

Ability Lvl 1 Weaknesses:

1. It takes 1 post to erupt. Opponents have enough time to get out of the circle if they are paying attention.
2. It can affect his allies as well.
3. If one of the replica sword is blocked by an ability, Eruption will not occur.

           -However, the immediate area, 2ft. in radius, of where the sword is will be burning with darkness flame, if the touched, they will suffer from 1st degree burn. -5 Endurance for 1 post. Unless they are fire element users.

Ability Lvl 1 Name: Burst Shot
Ability Lvl 1 Type: Melee
Ability Lvl 1 Cooldown: 3 posts.
Ability Lvl 1 Description:

Skill user creates hundreds of small tiny balls made of darkness fire and coat it around the katana.  When the katana is collided against something, it not only cuts but those tiny darkness fire balls will burst because of the impact that was caused when the katana collided against something.

Ability Lvl 1 Strengths:

1. Those Darkness Fire Balls are really tiny. As small as pinky nail size. Good Sneak attack when fighting with close combat opponents.
2. Causes 1st degree burn. -5 Endurance for 1 post.
3. +5 Strength due to the impact it causes when it collides against something such as another equipment or an ability.

Ability Lvl 1 Weaknesses:

1. Even with the sudden burst, the radius it covers is only 3ft.
2. Fire element users will not be burned.
3. Heavy sets of armor can block half of the burst,allowing them to receive only half of the damage.